Horsepower and Watts – Peak or Continuous

Petrol/Diesel engine outboards are always referred to by horsepower rating, the peak horsepower generated at a near top-end RPM. Increasing RPM generates rotational torque, for turning larger propellers, giving thrust and efficiency. Nowadays, watts (W) or (kW) are seen in specifications. This enables an understanding of the amount of power by giving an equivalent rating.…

Read More

Wave Heights and Statistics

Mariners tales of gigantic waves apart, here is a body of evidence about the existence of extreme waves and their increasing size based upon statistics. Figures from the British National Institute of Oceanography using a random process formula calculated that if you take the average height of waves in a wave train, then one wave…

Read More

Checklist – General Inspection

  Visual Inspection Checklist – Exterior Get a feel not only for hull,deck/superstructure condition but also its space and layout. You want a sound boat, the right boat for clients specific needs. Check for damage or repairs. While cleanliness is not necessarily a sign of poor condition, it can raise flags as to how well…

Read More

Text-Book Distress Call

Distress calls include certain information Stated in a specific sequence to ensure that authorities and others clearly know the nature of the emergency. A useful pattern of letters that assist remembering are : M.I.R.P.D.A.N.O  Mayday. Identity. Repeat. Position. Danger. Assistance. Number. Other.   The information and sequence are: VHF radio is tuned to channel 16 and…

Read More

Meanings: Mayday; Pan-Pan & Securite

Mayday: To be used only when a person is in immediate danger. Ist is reserved for situations requiring the most urgent attention. Pan-Pan: Indicates a situation that is not immediately life-threatening but could become worse in a short moment. Securite: A general call including information regarding safety. Generally used by authorities, licensed ship captains, or…

Read More

Protecting Deep Cycle Batteries

Deep cycle batteries last longer and work better if drawn down to 20% charge occasionally. They are designed for deep cycling and if not discharged significantly they become ruined. With a boat on her mooring and when unused for a period the minimal use from waterpumps, toilets, lighting etc. that take just a tiny charge…

Read More

Jump Starting Flat Batteries

With the advent of different types of battery construction that replace the traditional lead acid batteries – Absorbed glass matt, Lithium ion etc. An important lesson must be born in mind following a viscious fire onboard two vessel where one tried to assist another with flat batteries. The vessels in question were alongside each other.…

Read More

Fuel Level – Part 2: Testing the Sender Unit

The sender unit is mounted to the tank-top, usually via bolts and sealed with a gasket. Remove the unit and inspect it. The float on the end of the arm should be intact and capable of floating. The arm should move freely. The rheostat should read correctly: that is, when the arm is all the…

Read More

Fuel Level. Testing the Gauge. Part 1

A complete fuel gauge system is quite simple – it is easy to test and diagnose. The system is composed of three parts: The gauge itself, the fuel sender, and the wiring between the two. The gauge is dash mounted and powered by the ignition circuit. The fuel sender is mounted inside the fuel tank…

Read More

Inverters – How Efficient Is It?

Inverter efficiency is a rating of how much of the battery (DC) energy gets converted into usable 220volt (AC), usual inverter efficiency is in the range from 85% to 95%, with 90% being around average. Efficiency ratings are created using something like a light bulb or electric heater as a constant resistive load. But efficiency…

Read More