Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Inverter efficiency is a rating of how much of the battery (DC) energy gets converted into usable 220volt (AC), usual inverter efficiency is in the range from 85% to 95%, with 90% being around average.

Efficiency ratings are created using something like a light bulb or electric heater as a constant resistive load. But efficiency around electric motors (pumps, fridges, air con etc.) which are not a constant resistive load is more complex. It is split into two parts, the efficiency of the inverter (above), and the efficiency of the waveform.

Most motors and many electronic appliances run better and use less power with a pure sine waveform. Typically, an electric motor (such as a pump or refrigerator) will consume about 15% to 20% more power with a modified sine waveform than with a true sine wave. When choosing an inverter based on efficiency you need to consider the type of appliances you will be most often be running.

The charger in an inverter/charger presents a large load for a small generator (under 8kW). Chargers with a high “power factor” are desirable because they are less sensitive to peak voltage and need less AC power.  The usual recommendation is that a generator be sized at 2.5 times the power draw of the charger.

Some inverter/chargers such as Mastervolt Mass Combi and Combi Ultra have high efficiency chargers with virtual unity power factor so there is no need to oversize a generator.

Not all manufacturers use a wattage rating to describe the output capability of the inverter. Some use Volt/Amps. To convert VA to Wattage, multiply the VA by the power factor (~ PF) of the inverter. Typically, this could be 0.85

To convert say 1500VA to wattage ~ 1500VA x 0.85PF = 1275W.

It pays to know if your inverter is rated in VA or Watts or you may be a little short of power.