Arc Welding & Hydrogen Cracking of the Weld

During arc-welding hydrogen is released from moisture usually in the coating of the welding electrode. To minimise this low-hydrogen electrodes are used for welding high strength steels. Often pre- and post-heating the metal is applied to allow the hydrogen to diffuse out before it can cause any damage. This is specifically done  with high-strength steels…

Read More

How Does Hydrogen Affect Steel During Welding?

Hydrogen embrittlement is a form of stress corrosion cracking where hydrogen is the corrosive medium. Some metals are prone to absorbing hydrogen when this gas is present on the surface, subsequently causing cracking. In the context of boat building this relates to high strength steels and some stainless. High tensile steel and non-austentitic hardenable stainless…

Read More

How Heat from Welding Affects Metal

Heat Affected Zone (HAZ) is the area subject to the heat from welding. The heat brings the strength of the metal local to the weld down to or even below its original strength. Problems arise such as ‘weld decay’: it is very liable to pitting corrosion. For example in stainless steel weld decay (carbide precipitation)…

Read More

3 Simple Crystalline Structures of Pure Metals

Apart from a few esoteric exceptions, solid metals are crystalline. There are 14 different types of crystal unit cell structures or lattices, however there are three primary metallic crystalline structures described as body centre cubic (bcc), face centred cubic (fcc), and hexagonal close packed (hcp). Because metal atoms can bond in any direction metal crystal…

Read More

Hardened Engineering Metals

When work hardening occurs for soft metals it is a consequence of plastic deformation, a permanent change in shape. This is distinct from elastic deformation, which is reversible. Most metals are a combination of the two. Ductility is the ability to undergo plastic deformation before fracture. A material generally deforms elastically if it is under…

Read More

Engineering Metals

The property that distinguishes engineering metals from other metals found in the periodic table is their ductility. A metal is ductile if it can be permanently drawn (stretched) appreciably. The modulus of elasticity determines the flexibility of a material and is independent of its strength. Ductile materials have an elastic region under stress and strain…

Read More

How do Ceramics Prevent Electrical/Heat Flow?

Ceramics are compounds which contain metallic and non-metallic elements. Hard, brittle and more resistant to high temperatures and severe environments, they acquire these characteristics from the electron behaviour of their constituent atoms. Consistent with their natural tendencies, the metallic elements release their outermost electrons and give them to the non-metallic atoms, which retain them. The…

Read More

Why do Polymers/Plastics Resist Electric/Heat Flow

Polymer compounds (often called plastics) are poor reflectors of light. Unlike metals, which have migrant electrons, the non-metallic elements of the upper right hand corner of the periodic table have great affinity or attraction for additional electrons. Each electron becomes associated with a specific atom (or pair of atoms). Thus, in plastics we find only…

Read More

How do electrons conduct electricity?

You can think of a conduction electron as having hopped out of a covalent bond leaving a vacant state behind – a hole in the valence band. The vacant state could be filled by an electron hopping over from an adjacent covalent bond in which case the hole would move, for a hole to move…

Read More

What gives a compound the ability to conduct electricity?

Materials can be grouped into three main types of compound: metals, polymers/plastics, and ceramics. These are idealised categories, since most materials have intermediate characteristics. Metals are characterised by their high thermal and electrical conductivity. Metals owe their behaviour to the fact that some electrons are delocalised and can leave their ‘parent’ atoms. Conversely, electrons are…

Read More