Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

The property that distinguishes engineering metals from other metals found in the periodic table is their ductility. A metal is ductile if it can be permanently drawn (stretched) appreciably. The modulus of elasticity determines the flexibility of a material and is independent of its strength. Ductile materials have an elastic region under stress and strain then a relatively large plastic region prior to their fracture point. Ductile metals are less sensitive to stress concentrations than brittle materials. As a ductile metal is loaded, it can deform to redistribute the load over a broader area. Even though the brittle form of a material can often handle higher stresses, a ductile material can redistribute stress – and therefore actually handle a higher load. Ductility confers both processability and toughness to a metal and is a consequence of the ease of motion of dislocations of component atoms. Most pure metals are soft and of little engineering use, but control of the microstructure can produce metals of widely differing properties. For example, heat treatment can convert many alloys, including most steels and aluminium alloys, from a soft, easily shaped state to the very strong but less ductile state in which they are useful in service.