Tender/Dinghy Safety Gear

The basic items are: oars or at least a paddle, life jackets, anchor and chain/rope, buoyant heaving line, sound producing device (air horn, whistle, frying pan), a bailer (bucket, sponge, plastic jug with the bottom cut out) and after dark, lighting. Throwable buoyant seat cushions are good to have. Regarding the oars, try a test…

Read More

Sound/Fire Proofing Engine Compartments – Part 3

There are three methods to reduce sound. Absorbers – sound absorption reduces reflected sound inside an enclosed room. Sound waves strike sound absorbing material, the sound wave has an energy conversion of kinetic energy to heat. Typically, sound absorbers are porous materials such as open cell foams or fibres. Placing a face on the material…

Read More

Sound/Fire Proofing Engine Compartments – Part 2

There are two forms of noise.  1) Structure borne noise is mechanical vibration that becomes audible sound; flexing of a tank side, loose parts rattling etc. To control structure borne noise isolation and damping are employed. Engine mounts and mounts for onboard mechanical devices should be maintained regularly to help isolate and damp vibrations. Engine…

Read More

Sound/Fire Proofing Engine Compartments – Part 1

The life expectancy of the sound absorbing materials in most new boats is about 10 years. The material breaks down, packs down and generally looses effectiveness as the years go by through moisture absorption and other deterioration. Many sources of vibration when underway will loosen almost any bolt or fastening eventually. Things start to rattle…

Read More

Modern Trim Tab Stabilizers

Modern trim tabs instead of using the traditional stainless steel planes or tabs at the transom now use two new concepts: The rotary actuator is a polymer design that acts as a trim tab and vessel stabilizer. The function of this unit is the rotary actuator spinning that can deploy and retract the scoop making…

Read More

Trim Tab Maintenance

Traditional Trim Tabs Traditional trim tabs use stainless steel flat planes called tabs. The actuators adjust the tabs up and down to counteract with the bow up or bow down. The control panel is marked, bow up or bow down. Many electro/hydraulic trim tab designs are available and some are all-electric option—no hydraulics to maintain.…

Read More

Lightning Clouds Explained

The two clouds we are concerned with are Nimbostratus and Cumulonimbus clouds. Nimbostratus are rain clouds. Thunderstorm clouds are Cumulonimbus clouds with the electrical charges built up in the cloud. The best way to differentiate between the two is the way they look. Nimbostratus clouds are mainly huge and flat. They run horizontally in the…

Read More

Lightning Explained

85% of all lighting strikes near water. Lightning is basically a static electricity spark on a massive scale. A static electricity spark occurs is when taking clothes out of a dryer, or when you pull synthetic clothes off, or when you touch something that is charged, this is lightning on a small scale – basically…

Read More

Deck Fittings Checkover

Deck hardware such as cleats, chocks and lifeline stanchions, is expensive. High-quality boats use cast stainless, bronze or aluminium. Bronze fittings are easier to maintain if chromed, but can be left natural for a more traditional appearance on retro look boats. Cleats and chocks should be large enough to handle the size of rope appropriate…

Read More

Hull & Deck Laminate/Gel Coat Checkover

Stand at the bow or stern where you can look down either side. Use the reflection of the sun or an other light source to assess both the smoothness of the gel coat and the fairness of the hull. Moving your head left or right will “move” the reflection of the light along the hull.…

Read More