Sail Material by Type – 3

Traditional sailmaking relied on broadseaming: Panels cut with curvature then sewn together to induce 3D shape. Limitations: Shape changes under load; Inconsistent replication; Labour intensive Modern Approach: Shape defined digitally; structure carries load; seams become structural joints—not shaping tools. However controlled broadseaming still plays a role in durability and cost control Material Supply Chains Main…

Read More

Sails by Type – part 2: Downwind Sails

Downwind sails operate in a very different regime to upwind sails, they need to provide power, stability, and control: That means higher drag coefficients (by design); flow often partially separated; stability > absolute efficiency Asymmetric Revolution, the shift from symmetric to asymmetric sails. Why asymmetrics dominate: Easier handling (critical offshore); higher average speeds (apparent wind…

Read More

Sails by Type: Part 1 – Upwind (Fore & Aft)

The Modern Sail – is a composite structure designed around primary load paths: Head → clew (leech load); Head → tack (luff load); Clew → tack (foot load). Instead of woven cloth fibres distributing load inefficiently, modern sails align fibres exactly along these load vectors. Core Technologies: Membrane sails (e.g. North Sails 3Di, Doyle Sails Stratis,…

Read More

Required – Manuals, Signs, Notices

Manuals, Signs, Notices: Fire and Safety Plan. Station Bill. Manuals of Equipment. Charts. Pilot Books. Radio Distress Procedure. 2 x SOLAS No.2 Card. Typical signs and notices to be provided. Prepare the following: Prepare IMO type Fire & Safety Plan showing locations of all firefighting and safety equipment. Sticker pack is available. Post at wheelhouse.…

Read More

Flexible Hoses – Fuel, Gas, ‘Live’ Seawater

Flexible rubber fuel hoses are now considered to have a service life of 8-10 years as the modern fuel additives have led to increased rates of deterioration. Fuel hoses to be replaced with either a metal fuel hose in accordance with ISO 10088 or A1/A2 type flexible rubber fuel hose in accordance with ISO 7840.…

Read More

Loss of Stability – Following Sea

It is a little known fact that when a hull is supported around its mid-point by a wave as it passes under the ship and the bow and the stern are clear or nearly clear of the water and are unsupported, then the stability of the hull can be reduced by half or even more.…

Read More

Aluminium Coating Preparation

Aluminium can be great. But it requires extra attention or lifespan will be rapidly reduced by corrosion. Common aluminium boat corrosion problem areas are: Bilge spaces where standing water collects and sits. This includes corners formed by framing, and water tanks which sit stagnant or always full. Anywhere where another metal contacts the aluminium. Usually…

Read More

Chain Hallmarks & Windlass Gypsy

Look for embossed (raised) hallmark on the chain’s links; if necessary, get in touch with the manufacturer to help identification. If the hallmark is indented, or missing, this indicates it not made to a recognised Standard – its use in anchoring is questionable. When picking a chain choose its strength based on the loads the…

Read More

Chains and Windlasses – 3

Although both ISO and NACM Standards use the same ‘terms’, and within the same Schedule or Grade the strengths are the same, dimensions between them differ. NACM standards also include stainless steel chain, which has a strength that is greater than G3 chain, but less than G4 chain. If used as ground tackle, 316L chain…

Read More

Chains and Windlasses – 2

Although both ISO and National Association Chain Manufacturers Standards use the same ‘terms’, and within the same Schedule or Grade the strengths are the same, dimensions between them differ. NACM standards also include stainless steel chain, which has a strength that is greater than G3 chain, but less than G4 chain. If used as ground…

Read More