Rigging Inspections – Private Sailing Yachts

MECAL (International Marine Consultants Certifying Authority) technical notice MTN 25-2 (Rig Inspections Sailing Vessels) requires British Flag Commercial yachts: Rig 10-15yrs old – Riggers Inspection Report. Complete standing renewal of standing rigging advised at this point. Renewal of wires in pairs over several years acceptable. Rig over 15yrs old – Complete renewal of standing rigging required.…

Read More

Rigging Inspections – Commercial Sailing Yachts

Rig inspections for sailing vessels required for British Flag commercial yachts: Rig 10-15yrs old a riggers inspection report required. Complete renewal of standing rigging advised at this point. Renewal of wires in pairs over several years acceptable. Rigger to make recommendations for repair or replacement if required. The rigger inspections to be continued at a maximum of…

Read More

Work Schedules

Work Schedules – an examination of the vessel to identify repair, upgrades, routine and periodic maintenance to ensure safety and good operating condition. Inspections follow survey specifications but are for owner use only.

Read More

Loading/Unloading Condition Reports

Loading/Unloading Condition Reports – For vessels being carried as deck cargo, for overseas shipment, or by road transport. Attendances are required as part of a protection system for owners and shipping/transport companies on a ‘just in case’ basis. The operational details are recorded, documents, lifting and lashing calculations sighted, cradle support recorded. Vessel inspected prior…

Read More

Gas Installations

Gas installations. Note: In the UK only registered personnel can repair and where required certify gas systems. The inspection will assess the quality of any gas installation and typically include bottles security and condition, hose tightness and condition, corrosion of fittings, hose connection to copper piping, gas drain arrangement and dimensions.

Read More

Sea Trials

Sea Trials – Serious buyers will insist on a sea trial especially if the boat is uncommon or complicated. A sea trial is a ‘shakedown test’ for vessels usually at the last phase of construction, repair, modification, or sale/purchase. The survey can be used to confirm construction specifications, confirm the impact of modifications or be…

Read More

Engine Tests

Engine Tests – Observations can be made during an engine test and conclusions drawn. Typically inspection of the exhaust outlet and transom area may indicate combustion issues, air inlet or exhaust system obstruction, incompletely burnt fuel, faulty injector pump, worn injector tips or thermostat issues. Engine intake inspection may indicate excessive back pressure, worn bores/valves.…

Read More

Hydraulic System Installations

Hydraulic System Installations – Inspection and assessment of hydraulic cylinders and rams, pump types, swash plates and actuators. Inspection of hoses and pipes. Inspection of steering systems, main propulsion systems, stabilizers, windlasses, winches, lifts, bow and stern thrusters.

Read More

Ancillary Systems and Machinery Inspections

Ancillary Systems and Machinery Inspections – The inspection will assess if the engine can deliver sufficient power to run the constant baseline ancillary loads (including all drive losses) and have the capacity to produce the expected boat performance. A detailed external inspection of Engine Ancillary Systems – Assess (PTO) Power Takes Off’s for sufficient support,…

Read More

Engine Installation Surveys – 4) Sail Drive or ‘S’ Drive

Engine Installation Surveys 4: Sail Drive or ‘S’ Drive Inspection typically covers (Inboard Engine Inspection/Stern Drive/Outboard inspection where relevant): A sail drive resembles the bottom part of an outboard unit. The leg passes through the hull below the surface and is sealed by a rubber diaphragm. This diaphragm is a source of problems as it…

Read More