Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Ideal Battery Test Procedure – Test all batteries during pre-purchase surveys. With a bank of 2-4 batteries costing between £250-£600 it is a valuable test.

For example: a 12V marine battery has a charge of 12.84V, a Cold Cranking Amps capacity of 570EN and an internal resistance (IR) of 5.07 milli-ohms (mΩ) all leading to a verdict of BAD & REPLACE.

So what should I advise the client based on this data?
The voltage reading is very good, below 12.6V might raise concern and a red flag would be resting voltage below 12.4V.
The remaining CCA of 570EN is 77% of the original 740EN, below 80% and raising an amber flag but not serious.
The internal resistance is very good and still within the optimum range when new of 3-6mΩ.

So why the BAD & REPLACE verdict? This test is a single snap shot of the battery’s health and lacks the all important CONTEXT we need to make good recommendations. But we don’t know when the battery was last fully charged, how old it is or what its IR was when new. When installing a new battery – write the install date on the battery and if you can testing it to establish a datum.

In the end, note the data and put the client on notice that the battery may need replacing within 12 months or sooner if performance drops quickly.