Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
In some cases rust can be a message. If the staining is occurring adjacent to stainless steel hardware, then the “rust” is often the byproduct of a process known as crevice corrosion, whereby normally passive, corrosion-resistant stainless steel becomes “active”. “Active” for stainless steel is analogous to rusting for ordinary mild steel. In both cases, the metal is compromised, although in the case of stainless steel it is much more insidious as the flaking and shale associated with conventional steel is not present. Thus, whether it’s for cosmetic or structural reasons, preventing this staining is well worth the effort.
To prevent staining of this sort it is important to understand the process by which it occurs. In order for stainless steel to remain rust-free, it must be continuously exposed to a source of oxygen. In doing so, stainless steel is able to replenish and maintain the tough oxide layer that allows it to resist rusting. Stainless steel used on deck is exposed to air, which certainly provides ample oxygen to maintain the oxide layer. Even stainless steel used below the waterline provided the water moves freely and regularly, may be exposed to enough oxygen to remain passive. If, however, the stainless steel is exposed to an oxygen-poor environment, stagnant water for instance, then it’s likely to enter an active state.
In order to remain rust-free, stainless steel must have continuous access to oxygen, however, water trapped beneath a flange quickly becomes stagnant and oxygen depleted, which in turn leads to corrosion and staining. Fully bedding hardware is the solution to this problem. Chain plates are especially susceptible to this issue, as are the fasteners that support them, a failure of which could be catastrophic.