Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

The moulded integral twin keel construction with ballast inserted from inside relies heavily on the strength of the hull moulding around the root of the keel and the amount of reinforcement on the inside of the hull, in the form of frames, floors and other stiffening. It is therefore important to ensure that the hull is adequately reinforced, particularly over the after end of the keel. Twin keels are often at opposing angles, so that they will be more or less vertical when the yacht is heeled, thus providing better sailing performance. This presents a major potential problem when drying out on an uneven bottom, or in mud, because there is a tendency to force the keels apart. In most cases this is due to inadequate hull thickness around the keel and/or lack of reinforcement of the hull in way of the keels. The amount of movement and any evidence of movement is important, particularly if the vessel is kept on a drying mooring. After any grounding incident, however minor, check for damage to the base of the integrally moulded keels and around the root of the keels, for any signs of movement both on the inside and outside of the hull.

Grounding damage will often be covered by the vessels insurance policy. However if the damage has been caused by weakness in the original construction, an insurance policy (at best) may only cover a proportion of repair cost. If indeed there is weakness, then, in addition to completing the repair it will also be necessary to strengthen the hull and/or add reinforcement around the keel.