Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Lloyd’s Register of Shipping Special Service Craft (SSC) Rules can be used as the design standard. The SSC Rules are in common use in the large yacht sector. The design approach is based on the derivation of scantlings to meet design loads which are then increased as necessary to comply firstly, with practical constraints (Part 1) and secondly, failure modes based on loads and buckling criteria (Part 2 to follow). Typically an 80m displacement motor yacht of normal proportion and form represents the length associated with the 3000 GRT limit applicable to the MCA Large Commercial Yacht Code (LY2) and consequently is (generally) the limit for the application of SSC Rules. Above 3000 GRT the LY2 Code is no longer applicable and the option is to build the vessel as a SOLAS passenger ship.

Minimum scantlings are initially calculated using local loads and minimum plate thicknesses. The scantlings of a section based purely on this approach produce a very light structure. However, the level of complexity and lack of robustness of the structure make it impractical for yacht applications. As a result, some practical constraints based on achievable construction practices are then applied. With the application of the constraints the scantlings thickness increase over the initial design using pure rule minimum scantlings calculations. Wave bending moments are then derived from the SSC Rules. Section modulus calculations are performed on each of the sections so that an assessment of the strength for each can be made. In reality, for a yacht, there would not generally be a fully intact section in the midships region. Openings for stairwells, large hull windows and doors and bilge wells would normally be removed from the section calculation – a good reserve on strength is maintained in any design to account for openings and bending moments. The average stresses that are derived from the bending moment/section modulus calculations are factored-up by 25% to account for loss of effective structure.