Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Excessive anode wastage on a hull with an intact paint scheme may result with the hull being moored to, for instance, steel piling, another metal hull alongside, or a steel marina pontoon. If there is an electrical link the anode will have a great deal more area to protect – shared. Another trouble occurs if a metal boat is moored to a jetty whose steel piling is cathodically protected. If correctly installed and adjusted for the type and number of hulls being protected, this system is fine. However boats move and others take their place. It is possible that one boat is supplying current to its neighbour. The current will try to take a short cut through the shortest distance to the nearest hull and exit in a small area close to the jetty, causing rapid corrosion.

Simple galvanic cells are also created by an aluminium hull moored to a steel one and in electrical contact, or a steel hull to a copper sheathed vessel again in electrical contact. In the first case aluminium will suffer, in the second steel. The rate of corrosion will depend on the resistance of the electrical contact and on the porosity of the paint film, and whether there are any areas of bare metal.

Copper based antifoulings cause very extensive galvanic corrosion of galvanised steel, aluminium hulls and sterndrives, indeed any item base metal. A barrier coat of paint can be used to create insulation between the hull and fittings and the antifouling. Copper free antifoulings are suitable for all base metals. On the same theme, never use copper based antifouling on any hull if sacrificial anodes are fitted. Mooring alongside a copper sheathed boat for long periods should also be avoided.