Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
The principle marine grades of aluminium are:
Plate and Section Wrought: The ‘marine grades’ are the 5000 and 6000 series. Most plate and sheet is made from 5000 alloys, magnesium is the principal alloying element and is more effective than manganese in improving the alloy strength. Moreover, the 5000 series alloys have good resistance to corrosion and are probably the most common aluminium alloys in marine service.
Most extrusion (tubes, bars etc.)is made from 6000 series because these alloys are easier to extrude. Magnesium and silicon are the principal alloying elements. This alloy combines strength, corrosion resistance and formability.
The 5000 series can be work hardened to increase their strength while the 6000 series can be heat treated, again to increase their strength. Extra strength is usually accompanied by loss of ductility (elongation before fracture), also during welding the heat brings the strength down to or even below the original level of strength.