Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Annealing is the softening of suitable material by heating and then cooling. In this annealed state it may then be hammered, stretched and otherwise formed, progressing toward the desired final shape, but becoming harder and less ductile as work progresses – so it may be re-annealed periodically as the shape progresses. Annealing is stopped when the workpiece is near its final desired shape.

Before any cold working begins on the annealed piece the lattice of the material exhibits a regular (almost no dislocations) pattern. This regular lattice can be restored at any time by annealing. As the material is cold worked it becomes saturated with new dislocations, and more dislocations are prevented from nucleating (a resistance to dislocation-formation develops). This resistance to dislocation-formation manifests itself as a resistance to plastic deformation; hence, the observed strengthening.

Dislocations are created by fluctuations in local stress fields within the metal culminating in a lattice rearrangement. As the dislocations propagate they accumulate, interact with one another, and serve as obstacles that significantly impede their motion. This leads to an increase in yield strength and a subsequent decrease in ductility. Cold working generally results in higher yield strength as a result of the increased number of dislocations, and a decrease in ductility. The effects of cold working may be reversed by annealing the material at high temperature where recovery and recrystallization reduce the dislocation density. There is a limit to the strength that can be obtained by means of cold working.