Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Annealing is heat treatment that alters a material to make it more workable. The metal is heated to above its critical temperature, maintained at a suitable temperature, and then cooled in a furnace/insulated space. Annealing can soften material, relieve internal stresses, refine the structure by making it homogenous, and improve cold working properties. Steel if heated (generally until glowing) for a while and then slowly cooled to room temperature in still air; or, copper and brass cooled slowly in air, or quickly by quenching in water – in this fashion, the metal is softened and prepared for further work – such as shaping, stamping, or forming.
Three stages of annealing process proceed as the temperature increases: recovery, recrystallisation, and grain growth. Recovery results in softening the metal through removal of primary linear defects called dislocations and the internal stresses they cause. Recovery occurs at the lower temperature stage of all annealing processes and before the appearance of new strain-free grains. The grain size and shape do not change. The second stage – recrystallisation, where new strain-free grains nucleate and grow to replace those deformed by internal stresses. If annealing is allowed to continue once recrystallisation has completed then grain growth occurs. In grain growth, the microstructure starts to coarsen and may cause the metal to lose a substantial part of its original strength. This can however be regained with hardening.