Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

The main consideration with a dry exhaust is heat. Diesel engine exhaust gas temperatures reach 600 degrees c and the surface of silencers and exhaust pipes can reach between 200c and 450c. Serious lagging has to be fitted surrounding equipment/structures/crew from burns or heat damage.

Special lagging, insulated exhaust pipe compartments and sometimes air cooling blowers are all used. The heat is only present while the engine is in running or cooling down. A system subject to such large temperature swings while running must be designed using components that will operate without cracking or breaking due to contraction and expansion.

The system from the engine all the way to the top of the exhaust has to be secured yet allowed to expand and contract without failing. Slip joints, bellows and pipe hangers all come into play here.

Because no water is used the exhaust setup creates options in terms of engine cooling. The heat exchanger method could be used, and the seawater simply discharged overboard instead into the exhaust. Or move the entire heat exchanger outside the boat where the passing water will carry away the heat. In this case the heat exchanger is called a keel cooler because it is mounted on the outside hull surface.

With a keel-cooler heat exchanger there is no longer a need to bring seawater into the boat – so a keel-cooled boat does not need the thru-hull fitting, sea strainer, seawater pump, secondary piping and other components that are required by a heat-exchanger boat.