Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Claims related to fires and explosions on vessels, show that nearly 60% originate in the engine room. Two thirds of these occurred on the main engine and auxiliary associated components. The majority of these incidents are caused by a failure in the low-pressure fuel piping, allowing spray onto an unprotected hot surface.

Pipe fatigue due to age/heat/vibration results in a lower wall thickness and then on to a fracture. Then spray onto exposed source of ignition; alternator bushes, unshielded exhaust etc. There is usually inadequate protection by heat shields to prevent hot fuel spray from coming in contact with a source of ignition. Some of the most commonly occurring causes of fuel spraying and starting a fire are: Exposed areas of boilers. Turbochargers. Indicator valves on cylinders. Heater for purifier units. Exhaust manifold, pipes and associated flanges. Electrical wires/components and switchboards. The temperature of these areas can easily exceed 500 °C which may be well above the oil’s auto ignition temperature.

Another factor which must be considerd is the age of  the vessel. The risk of leakages from machinery increase as ships grow older. Protection of hot surfaces may degrade, with the quality of insulation deteriorating increasing the probability of ignition and risk of fires. Older vessels can face cuts to their maintenance and safety budgets as they near the end of their service life. A vessel may have changed ownership and management a number of times during its life, and this can have a direct impact on the consistency of maintenance in the engine room.

Fuel hoses are considered to have a service life of 10 years – hoses to be replaced in accordance with ISO 10088 and the type A1 or A2 hoses in accordance with ISO 7840