Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Engine starting batteries are required to provide a very high cranking current for a short time. After this the battery simply receives charge from the alternator. To achieve high cranking current output, the manufacturer uses very thin plates made in such a way that the acid has good access to the active material which is producing the current. If you provide long and deep discharge periods the battery is likely to have a short life. When a battery is regularly charged and discharged, this causes deterioration of the positive plate. Deep cycle batteries, in simple terms have a thicker plate and a more dense active material which is able to withstand the pressures of this type of use.

Plate thickness varies widely and therefore cannot be used as an indication of capacity. For example, a high performance engine starting battery with 22 plates per cell is available and is approximately 65 ampere hours in capacity, whilst another battery of 350 ampere hours has only 15 plates per cell. When specifying a battery it is important that the application is considered: For marine engine starting the MCA (Marine Cold Cranking Amps) rating is an indication of the battery’s ability to start an engine, whilst for auxiliary loads and deep cycle applications ampere hour capacity is what you need to consider.