Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

When the anchoring depth is known the additional line/chain is called “scope,” so the boat tugs on the anchor at an angle. An insufficient amount of scope is the most common reason why anchors drag.

A scope-to-depth ratio of 3:1 is the bare minimum for anchoring in the best of conditions. Setting out 5:1 is considered appropriate for average conditions. And in rough weather a scope of 7:1 or even 9:1 may be necessary.

If there is a current or some wind paying out the scope is easy. But in calm conditions put the boat into reverse. Anchoring depth has to allow for predicted tidal height, then the effect of wind against or with tide which can affect predicted tidal heights; atmospheric pressure is another factor.