Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Sacrificial anodes are utilised to protect boats from corrosion. Referred to as zincs, they can also be made of aluminium, magnesium, and various alloys.

When metal surfaces go through extended contact with electrolytes, an electrochemical reaction known as corrosion, sees the metal return to its natural and weaker state as an ore. To slow down the process of corrosion, boats need methods of cathode protection. Cathode protection comes in forms of plating, galvanising, and sacrificial anodes.

Anodes work by corroding in place of your boat’s hull. Made up of highly active metals with more negative electrochemical potential than the metals they are used to protect, anodes attract electrolytes. The oxidation reactions are then transferred away from the surface of your hull and underwater fittings to the anode, which will be sacrificed to galvanic corrosion. Anodes need to be replaced regularly for continued effectiveness.

Over zincing happens when there is too much anodic protection. Having an excessive number of anodes installed can lead to unintended consequences. Boats with fiberglass hulls are less likely to be affected by over zincing, but wooden and metal hulls are particularly susceptible to the negative effects of over zincing which include: Burnback/discolouration; Paint delamination and flaking; Caustic wood rot.

So, how much zinc does a boat need? Cathode protection systems vary depending on the type and size of your boat and where it will operate. Typically, sacrificial anodes should have 1 to 2 percent of the surface area of the metal surface it needs to protect.