Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Exhaust hose, double-clamped – prevents water and, more importantly, fumes from escaping. Exhaust hose is a heavy-duty fabric reinforced construction, either with or without wire as extra reinforcement. The marine standard is that the hose is required to be able to withstand total loss of cooling water (with engine at full power) for two minutes without damage.
Hoses that are longer than 4-6 times the inside diameter of the hose, or with tight curves are wire reinforced to prevent the hose from chinking on bends, sagging on long horizontal runs, or pulsing from pressure changes in the exhaust. The wire can rust, weakening the hose. The wire can also be a path for stray galvanic current, or short circuits. The wire is tough to cut and can make it tough to get a tight seal where it is clamped. The soft-wall variety should never span open spaces or be hung from beams as pulsing causes chafe at the supports. All exhaust hose connections are double clamped ideally with a minimum clamp width of 12mm. Carbon monoxide fumes, not leaks, are the priority concern.