Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Specific maintenance requirements vary for different types of seacock (plug, ball, bronze, Marelon, etc.). Operating the seacock monthly and greasing twice a year is ideal (even “maintenance-free” types). Seacocks without a grease fitting can be lubricated in the water only by following these 5 steps:
1 Close the valve. 2 Pull the hose. 3 Remove remaining water from the valve pipe. 4 Swab a suitable waterproof grease onto the ball. 5 Inspect hose for damage, deterioration, corroded clamps, etc, then reattach. 6 Exercise the valve four or five times to spread the grease.
When on the hard you can lubricate 4 -6 (the opposite side of the ball and seal).
Note: The inferior modern type ball valves, which are probably what we call the ‘non marine type’ nickel plated brass have no more than a 5 year service life but are acceptable for use provided that they are periodically removed, serviced and internally inspected within a 5 year cycle.