Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Inspect all hoses for stiffness and cracking – replace any that are faulty. Make sure they fit snugly. Inspect prop(s) for dents, pitting, distortion and cavitation lines on the hub. Make sure retaining nuts and related hardware are secure. Check for excess play in the prop and the cutlass bearing on the shaft. If the boat has a rudder, ensure that it turns freely. Check the rudder stock is true and the bearing fits well. Inspect the hull for blisters, distortion and stress cracks. Check the antifouling and/or other hull coatings. Clean the engine intake sea strainer and check it is secure. Inspect, lubricate and check the valve handles for movement on all seacocks/valves. Test the bilge pump and manually test the float switch – inspect the pump’s hose.

After the boat is launched, check all thru-hulls for leaks.