Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
A marine valve is required to withstand a 220kg load for a period of 30 seconds – so if you step on one in the engine room it won’t break off and let in sea water.
There is some confusion between seacocks versus ball valves. True seacocks have a bronze body holding a tapered plug with a hole through it, held in place by a nut or some other easily removable means, and a handle. Turned one way, the plug lets water run through; turn the handle the other way, the flow is stopped. Servicing the seacock is easy: Remove the nut and the tapered plug lifts out for cleaning and greasing. Which should be done yearly. Ball Valves – Most seacocks used today are really ball valves – instead of a tapered plug, there’s a ball with a hole through it. They’re still called seacocks, but require less maintenance than the plug-style – periodic lubrication through a fitting is about all that is needed. These are fine, as long as they have the label indicating they are listed for marine use. Unlike some of the seacocks used for generations, the seals on these marine ball valves seem to begin to fail after 5 years.