Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Rust stains running across a deck or hull are nothing new. If the staining is occurring adjacent to stainless steel hardware, then the “rust” is often the byproduct of a process known as crevice corrosion, whereby normally passive, corrosion-resistant stainless steel becomes active. The metal is compromised and it is much more insidious as the flaking and shale associated with conventional steel rust is not present. Chain plates are especially susceptible as are the fasteners that support them, a failure can be a disaster.

It is important to understand the process – in order for stainless steel to remain rust-free it must be continuously exposed to oxygen to replenish and maintain the tough oxide layer that allows it to resist rusting.  Stainless steel used on deck is exposed to air, which certainly provides ample oxygen to maintain the oxide layer. In an oxygen-poor environment, stagnant water for instance, then it’s likely to enter an active state. Water trapped beneath a flange or chainplate quickly becomes stagnant and oxygen depleted, which leads to corrosion and staining. Short of replacing the hardware there’s not much that can be done.  The staining emanates from the perimeter of, or under, the offending hardware because water becomes stagnant and thus oxygen-depleted. It then leads to “activation” of the stainless steel; it begins to corrode.  This phenomenon extends to fasteners as well, if the holes through which they pass in decks, cabins and hulls, are filled with stagnant water they will become active.