Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Evaluation of the structural integrity of a vessel includes all the items that keep a vessel afloat – hull/deck/plating, ribs, bulkheads/web frames, stringers/longitudinal, engine bed, chain plates, mast steps, standing rigging and all the fasteners that keep them connected. Traditionally, hulls use a transverse framing system with a longitudinal keel, closely spaced transverse ribs or frames, a series of longitudinals and plating. This transverse framing system is the most common for small vessels. The keel, stem and stern are assembled first, and then a series of curved ribs are attached to the keel. The ribs are then tied together by longitudinals that curve to the shape of the hull. Separately, beams are attached to the top of the ribs to produce a strong box-like frame; these beams also support the deck. Transverse bulkheads are added for additional strength. Larger craft which require higher hull strength will also have longitudinal bulkheads. Longitudinal framing is closely spaced while transverse deep web frames are widely spaced; a combination of techniques can also be used.