Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

MECAL is the (International Marine Consultants Certifying Authority), their technical notice MTN 25-2 (Rig Inspections Sailing Vessels) requires British Flag commercial yachts:

1) Rig 10-15yrs old – Riggers Inspection Report. Complete standing renewal of standing rigging advised at this point. Renewal of wires in pairs over several years acceptable.

2) Rig over 15yrs old – Complete renewal of standing rigging required.

The quality of stainless wire these days is often disappointing with significant corrosion staining in one year or corrosion on only one strand of the wire. At the other extreme, on older yachts with quality wire (still of good standing) I am reluctant to advise replacement, although it must be appreciated that the repeated loading of the wire underway.

For a private yacht I apply MECAL technical notes as follows in order to permit the reasonable possible use of existing standing rigging.

1) Full rig inspection required to be performed by competent rigger and certificate issued before launching. Rigger to make recommendations for repair or replacement if required. Renewal of wires in pairs over several years acceptable.

2) The rigging inspections to be continued at a maximum of 5 yrs and if any deteriorations or damage noted then a rigger to be called to the boat.