Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
To restore an alloy billet to its original workability it is held in the furnace at about 500 centigrade and then kept at 383 centigrade until an even temperature gradient is achieved throughout the piece. This allows the internal structure of the alloy to reorganise and stabilise in a homogenous state. As the metal is ‘cold worked’ (rolled, pressed, hammered) the internal structure of the metal is undergoes change (slippage) as the molecules move to positions where they are closer packed. There is a limit to the amount of movement (and thus strength) that can be obtained. As cold working continues resistance to further movement increases. It is said to be work hardened/strain hardened or cold worked.
Cold working is the strengthening of a metal by the plastic deformation mentioned above. This strengthening occurs because of the dislocation movements and dislocation generation within the crystal structure of the material. Many non-brittle metals with a reasonably high melting point as well as several polymers can be strengthened in this way. Cold working is characterised by shaping the workpiece at a temperature below its recrystallisation temperature, usually the ambient temperature.