Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
There are two forms of noise.
1) Structure borne noise is mechanical vibration that becomes audible sound; flexing of a tank side, loose parts rattling etc. To control structure borne noise isolation and damping are employed. Engine mounts and mounts for onboard mechanical devices should be maintained regularly to help isolate and damp vibrations. Engine mounts – left untightened or not adjusted – can cause or solve many vibration problems.
2) Airborne noise is sound waves being carried by the atmosphere; engine noise, turbo whine, water-makers etc. To control airborne noise materials that block or absorb noise transmission are used. Reflected noise can make an engine compartment louder – loosening a simple little engine room access plate or cover can open up a noise path. If you can see it, you can hear it. Any hole or opening made in a bulkhead for new wiring or plumbing, you need to properly seal that noise source off. Also leave room for sound proofing treatment when you add a mechanical device like an air conditioner or generator. Often retrofitted equipment does not leave space for appropriate sound control material.