Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

The failure of a rubber impeller is high on the list.  There may be several on any boat – outboard, electric head, pressurised water system, wash-down pump and oil-change system, engine cooling-water pump, and fuel pump. Most pumps use impellers, they can fail for several reasons at any time with consequences ranging from a smelly-mess to expensive engine damage.

Impeller pumps generally fail in two ways. First is a gradual loss in performance due to impeller or housing wear or age. Second is sudden failure with the impeller losing some or all of its blades – usually caused by running the pump dry often caused by a water inlet seacock not being opened or a plastic bag covering the inlet.

The impeller often sheds its blades. The lost blades need to be tracked down and removed, especially if it is an engine cooling application. Failing to do so will usually lead to further problems and blockages.