Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
As a rule of thumb expect a typical anode to be effective to a distance of 6-7 times its own length. So for an anode that is approximately 150mm long, it should be effective to a distance of about 1 meters in any direction.
Sacrificial anodes on a shaft need to be installed so as not to restrict water flow to ‘P’ bracket cutlass bearings.
Sacrificial anodes need to be installed to avoid areas marked for lifting slings and chocks.
An electrical resistance greater than one ohm will decrease the effectiveness of the protection systems performance. Resistance measurements should only be taken when the boat is out the water.