Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

2) Stern drive inspection typically covers (Inboard engine where relevant): To satisfactorily inspect a stern drive the vessel needs to be ashore and the drive removed from the boat. Lack of routine inspection is the cause of premature failure of universal joints, gimbal bearings, engine drive coupling, rubber gaiter and bellows. Inside the bellows are important parts which require regular service. There are very specific procedures to follow; they should be followed to the letter to insure that the drive and controls function properly.

Most damage is due to lack of maintenance. The drive units internal (and some external) parts contain different metals which compound corrosion problems. Often damage is a result of improper installation of electrical equipment; a common example is incorrect polarity in a retro fitted bilge pump or loss of electrical continuity between the drive and the transom.

If the drive has not been dismounted only an external inspection will be possible.