Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Marine Engineers Certifying Authority Limited (MECAL) technical notice MTN 25-2 (Rig Inspections Sailing Vessels) requires:
Rig 10-15yrs old – Riggers Inspection Report. Complete standing renewal of standing rigging advised at this point. Renewal of wires in pairs over several years acceptable.
Rig over 15yrs old – Complete renewal of standing rigging required.
I am disappointed with the quality of stainless wire these days often it is Chinese and some of that is garbage with significant corrosion staining in one year or corrosion on only one strand of the wire. I am reluctant to advise replacement of quality wire although it must be appreciated that the repeated loading of the wire is underway.
For private yacht apply MECAL technical notes as follows in order to permit the reasonable possible use of existing standing rigging. A full rig inspection required to be performed by competent rigger and certificate issued. Rigger to make recommendations for repair or replacement if required. Alternatively – rigging to be replaced in pairs (beginning with the inner shrouds) at end of each season during maintenance period.
The rigging inspections to be continued at a maximum of 5 years and if any deteriorations or damage noted then the rigger to be called to the boat.