Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Wet exhaust has seawater mixed with the exhaust before it is routed out of the boat. Injecting seawater dramatically lowers the temperature of the exhaust so the fibreglass tube or rubber exhaust hose is not a threat in terms of burns or fire. Exhaust noise is suppressed as the water expands into steam and mixes with the exhaust gasses.
The water is provided by a dedicated seawater pump that typically first passes the seawater through the engine oil cooler, gearbox cooler, and main engine block heat exchanger before being injected into the exhaust just downstream of the exhaust manifold or turbocharger exit. After being injected the mixture is often routed through an inline silencer for further noise reduction. In some cases a water separator is also used which quiets the exhaust even more and allows the exhaust gasses to be discharged above waterline and the water portion quietly discharged below waterline – this type of system is often used on generators to eliminate splashing noise created by discharged water.
The main pros and cons are: Pros – far fewer heat issues with exhaust runs; more interior space; easier to design and install. Cons – seawater pump failure could destroy engine; sea strainer, pump, injector elbow maintenance; exhaust can blow back into boat in following wind.