Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

The old style/conventional stuffing boxes leak. They are supposed to — that is how they are lubricated and cooled. The knack is to adjust them so they leak 2 – 4 drops a minute when under way; just enough to stay cool, but not so much they become a flooding problem. When stationary they do/should not leak.

The leakage has side effects. In most cases it drips out of the stuffing box and over the hose clamps that connect it to the shaft/stern tube. Because the clamps remain continuously wet, they are tailor-made for crevice corrosion, where stainless steel actively corrodes because it is robbed of oxygen – for stainless steel to remain corrosion-free, it must be continuously exposed to air. When robbed of air, it transitions from a passive to an active state. At the very least the clamps used for a stuffing box are to be heavier duty than a typical one used for tightening a hose.

The corrosion occurs along the lower half where it drips; where it is least visible. The remainder of the clamp often looks perfect. It is this lower portion of the stuffing-box hose clamps that needs to be inspected. The inspection may require the use of a mirror, or small camera.

Only the most robust, corrosion-resistant solid clamps (rather than perforated bands) should be used, and all 316 stainless steel. Solid bands are highly resistant to stripping and fracturing between threads, even when over-tightened. In larger, heavier-duty installations, T-bolt clamps may be used and of the interlocking rather spot-welded variety.