Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
The ‘bitter end’ should consist of a section of line as a cut-away to jettison the anchor and chain quickly if – you dragging anchor onto a lee shore; or you find you are being born down upon by a vessel underway or adrift; or a medical emergency aboard and need to get underway immediately.
The line should be spliced onto the chain (three strand is most often used) minimising its profile. It should have sufficient strength to support the weight of the chain and anchor in the event it fully runs free by accident. 1.5 cm three-strand nylon line has a minimum breaking strength 4 tons – 120m of 1.25 cm chain weighs 450kg and thus should present no problem. The final 7m of chain should be painted. The cut-away should deploy onto the deck (not in the chain locker) and cut.
Equally important, the cut-away must not be too long. It should be possible to attach a chain hook to the chain for retrieval should it deploy inadvertently. This means the chain hook that is secured to a suitable length of line that can be bent onto the capstan. Hauling in on this will let you re-reeve the chain over the gypsy. The hard point where the cut-away line is attached inside the chain locker must also be sufficiently sturdy to support the full chain and anchor weight.