Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
Exhaust system leaks are serious, not only because of the potential engine failure, but also due the introduction of deadly CO into the interior of the vessel. Dry exhaust leaks (between manifold and block) can be found by feeling for escaping exhaust or holding tissue paper near the suspected area and watching for movement. Wet leaks in manifolds, exhaust risers, mufflers, etc., are normally accompanied by corrosion, stains, or “running rust” originating at the leak itself.
Lacking the above signs, another option is to clean the area completely with non-flammable aerosol disc brake cleaner, then spray on a soft and dry underarm deodorant and let this dry (it could take five or six hours on a cold engine). Once dry, the deodorant leaves a coating of white powder that makes a leak easy to spot and the dry coating is easily removed.
For fuel system leaks at the engine (oil, antifreeze, or any other engine leak as well) dry the area beneath the engine and cover with paper towels or oil pads and check for wet areas (the engine may have to be running to generate the leak).
If you suspect fuel fitting leaks, clean the connections with alcohol and tie a little toilet paper or paper towel on each fitting, then look for evidence of leaking.