Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Aluminium, stainless steel, or composite glass-reinforced plastic are the choices and whether to go for a solid single piece casting or a rubber bushed hub, and lastly the number of blades required. Solid props without a splined rubber bush down the centre of the hub, are predominantly for competition and are to be avoided because there is no ‘shock absorption’ when putting the engine into gear or when at speed.

Vibration is a major problem without the shock-absorbing qualities of a bush. The number of blades really is only an issue in high performance or sports applications; otherwise a standard propeller is more than adequate. The extra expense of more or fewer blades is often not warranted, or justified. And it is the same situation with the stainless steel versus the rest argument.

Stainless propellers do give better performance, have stronger blades that don’t warp under load (aluminium ones predominantly don’t either), better cupping, more efficient shape, and so on. All true, but only for the upper end of the performance scale.

If your boat is fitted with an alloy prop – thats fine. There is an exception where the expense of a stainless prop is worthwhile. If you have a heavy rig, or an inefficient hull, or other contributing factors, then a stainless steel or multi-bladed version would certainly be more efficient. The extra fuel economy you get far out-weighs the purchase cost.