Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
There are usually around 8 different types of hoses onboard, each a specific type; fuel, exhaust, gas, engine water intake, fresh water (hot and cold), waste, water heater, bilge water, gear lube, and blowers. The International Standards Organisation (ISO) sets standards on many of these hose types, to keep boats and boaters safe. Examples of poor standards are carbon monoxide leaking through sub-standard exhaust hose. Fuel eating through liner of cheap fuel hoses. Hot engine water lines bursting (or melting).
Fuel hose construction is based upon fire resistance and permeability – Fire resistance is “two-and-a-half-minute burn test,” of which there are two levels. The more stringent test are classified as Type A; hoses with slightly less fire resistance are classified as Type B. Permeability test is the migration of gas vapour through the walls of the hose. The more demanding test are Class 1. A higher permeation rate are Class 2. So there are 4 classes of hose: Type Al, Type A2, Type B1, and Type B2. To qualify the hose designation, date of manufacture, the name of the manufacturer (or trademark) must be on the hose otherwise it is not legal.
Any hose run as a fuel line supply must be classified as Type Al. Vent and fill lines must be type A1 or A2 inside engine compartments. Diesel fuel systems include a modification that allows any of the four classes of hose to be used for fill and vent hoses.