Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
A marine toilet is a relatively simple apparatus to repair. There are just a handful of manufacturers; most have replacement parts for purchase. Repair is generally a matter of getting dirty.
Here is how it works. Water is drawn into the toilet by pumping the plunger. This creates a vacuum that draws seawater in via a through-hull, valve and small hose. The toilet bowl fills with seawater so it can flush the waste. Next, the deploy the same plunger to create pressure, pumping the waste from the bowl via a large diameter hose, valve thru-hull.
A “vented loop” is added in two places — between the through-hull and the toilet and between the toilet and the outlet. This is because the toilet is mounted below the vessel’s water line. Installing vented loops appropriately and ensuring that the vents are free of debris is the critical part. Water flowing freely from a through-hull into the toilet can fill the bowl — filling the boat.
A ‘joker valve’ is a one-way valve that lets waste be pumped out and not allow it to flow back in. These rubber devices stretch and wear out over time and are the most common item to be replaced in a waste system.