Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.
“Just open the blisters and fill them.” That was the initial assessment from a yard. According to them, the osmosis damage was not particularly serious and the proposed repair was straightforward: Open the blisters locally. Allow them to dry. Fill and fair the affected areas. Apply a new coating system.
What I found was fundamentally different. This was not a typical case of superficial blistering beneath the gelcoat. The blisters were large, widespread and deeply developed. Beneath the surface, the resin matrix was softened and the glass fibres were no longer properly embedded in a sound structural bond.
In other words: The damage was inside the laminate itself. The density of the blistering and the extent of the degraded material indicated that the outer laminate layers were structurally compromised over large areas of the underwater hull. A local blister repair would therefore have treated only the visible symptoms.
It would not have restored the damaged laminate.
The technically appropriate repair would require: Complete removal of the underwater coatings, milling away all damaged laminate layers, controlled washing and drying, structural rebuilding of the outer laminate, a new epoxy barrier system, and a complete antifouling rebuild.
On a 40-year-old motor yacht, the cost of such a repair can quickly exceed the realistic market value of the vessel. What had been presented as a cosmetic repair was, in reality, likely a case of major structural rehabilitation — and potentially an economic total loss.
This is exactly why major repair decisions should never be based solely on the opinion of the party hoping to carry out the work. Before spending serious money, get an independent assessment. Because the cheapest repair proposal is often only cheap until the damage is properly understood. Always diagnose first. Repair second.