Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Flexible rubber fuel hoses are now considered to have a service life of 8-10 years as the modern fuel additives have led to increased rates of deterioration. Fuel hoses to be replaced with either a metal fuel hose in accordance with ISO 10088 or A1/A2 type flexible rubber fuel hose in accordance with ISO 7840. As per the requirements of ISO 1088 install fuel shut off valve(s) on the fuel supply lines.

Flexible rubber gas hoses have a service life of 5 years and regulators 10 years, both from date of manufacture and not the date they were installed. Replace flexible plastic gas hose in the gas bottle locker and flexible rubber gas hose on the cooker with an armoured gas hose. The replacement gas hoses need to be in accordance with ISO 10239 and meet the requirements of EN 1763. Rigid copper gas pipe to be sheathed – at least where it is supported or runs through bulkheads. The drain in the bottom of the gas bottle locker to fit a 18mm (3⁄4″) drain pipe and this needs to drain overboard through the hull or the transom

‘Live’ seawater pipes to be of marine grade reinforced type and supported. If the pipe length is more that 6-8 times the internal diameter it is to be supported. The general rule of thumb is that the supports are distanced every 8-10 times the external diameter of the pipe. All pipework to be double clipped. Pipe and clip condition to be monitored as part of a regular periodic maintenance plan and any deterioration requires replacement. Pipes to be replaced every 10 years regardless of appearance.