Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

Aluminium can be great. But it requires extra attention or lifespan will be rapidly reduced by corrosion. Common aluminium boat corrosion problem areas are: Bilge spaces where standing water collects and sits. This includes corners formed by framing, and water tanks which sit stagnant or always full. Anywhere where another metal contacts the aluminium. Usually a stainless faster, bracket or clamp; or bronze valves. Issues caused by incorrect electrical installations. Anywhere the aluminium is covered. Such as deck coverings including teak decks, foam decks, and any other popular alternative decking. – Any faired and or painted surface with any minor impurity or that becomes damaged or scratched through use.

Keep aluminium bilges dry, keep the metals separate, and be super attentive to keeping dissimilar metals separated with correct sealant coating during preparation and installation work.

Recently almost all new build small aluminium boats are utilising spray foam applied to the aluminium hull plate as interior insulation for thermal and acoustic reasons. This is unlikely to be trouble free over the years, an aluminium corrosion pit behind the foam insulation is the most likely outcome. It will be difficult to detect with a plate thickness measurement gauge as the chances of selecting the problem areas require to be carefully thought out. Corrosion rarely comes from the alloy itself, but from water traps, dissimilar metals, and poor isolation details.

Spray foam insulation makes any inspection or subsequent repair very time consuming and difficult.Not all marine grade aluminium are the same it depends on where the aluminium is produced. Ideally the best solution is coating preparation during build i.e.