Keith Butterfield, Yacht and Marine Surveyor. Costa del Sol, Spain.

There are three major manufacturing Standards that dictate chain dimensions and strengths: ISO Standard (International Standards Organization); NACM Standard (National Assoc. of Chain Manufacturers); Din 766 (Metric Standard). Chain can also be manufactured to no recognized Standard – a questionable choice for use in ground tackle.

ISO Standards are used to make chain compatible with windlass use, often referred to as ACCO chain. This chain comes as Schedule 30 (G3), either as Proof Coil (PC) or BBB (Triple B or 3B), or as Schedule 43 (G4) called High Test (HT). In addition, ISO chain is often ‘double dipped’, which means that it was left in the molten zinc for longer than usual, resulting in a thicker, thus longer lasting coating.

NACM Standards are used to make chain for ‘general use’, often called industrial chain, generic chain, or general purpose chain. NACM chain also comes as Schedule 30 (G3), but only as Proof Coil (PC), and as Schedule 43 (G4), this, too, is called High Test (HT). Even though made for ‘general’ use, several windlass manufacturers make gypsy or chain wheels which are compatible with this chain.

NACM chain also comes in higher grades of strength, all of which lose strength when galvanized. A second heat treatment following the galvanising process recaptures the original strength of the chain, but this adds to cost, using higher strength chains is of questionable value unless weight savings is important.